Payment & Shipping Terms:
|Forming Model:||Customized||Main Forming Power:||45 Kw|
|Cutting Type:||Hydraulic||Forming Type:||Copy Italy|
steel forming machine,
cold roll forming machinery
Construction Crash Barrier Expressway Guardrail Cold Forming Machine Gearbox Driven 3 mm Plate Thickness Hydraulic cutting Used in Macedonia Country
Machine Overview :
Highway guardrail board is composed of two corrugated steel guardrail board and two fixed between the two pillars of the pillars, two pillars fixed clip in the two pieces of steel between the steel guardrail board.
The expressway fence is the main form of a semi-steel fence, which is a continuous structure that is stitched with a corrugated steel guardrail and supported by the main pillar.
When the vehicle collides with it, it is not easy to be crashed because of the good impact resistance and energy absorption of the corrugated steel guardrail, and it can also protect the vehicle and the crew.
This expressway guardrail roll forming machine mainly consists of decoiler, guide device, levelling system, hydraulic station, punching, roll forming system, cutting system and run out table.
|Item NO||Description||Offered specification|
|1||Roll Forming Machine||Guard rail|
|2||Material Width||According to the profile|
|4||Rolling Thickness||2.0-3.2 mm|
|5||Control System||PLC (Panasonic) as list in the note|
|6||Un Coiler||10 ton hydraulic de-coiler|
|7||Pre-cutting||The first big punching adopt double cylinders, the other three punching adopt single cylinder|
|8||Leveling Station||Upper is 3 rollers, down is 4 rollers (total is 7 stations), material is 40Cr steel, HRC48-52°, 7.5kw|
|10||Cutting mode||Hydraulic pre-cutting|
|11||Material Of Cutting||Cr12Mov quenching 58-62ºC|
|12||Hydraulic Station Power||22kw|
|14||Conveyor table||3KW, 6 meters|
|15||Roller Stations||20 stations (according the final design)|
|16||Roller Material||GCR15, HRC58-62ºC, coated with chrome|
|17||Shaft Material and DIA||¢100mm, material is 45# forge steel|
|18||Maim Motor Power||55kw|
|19||Structure Of The Stations||Cast iron|
380V, 50HZ,3 phase
According to customer's require
|22||Way Of Drive||By gearbox|
|23||Color Of The Machine||Yellow and blue
2) Loading 5T. Inner diameter of coil: φ508mm,
3) Maximum diameter of coil: φ2000m
The wall plate type seven roller flatter, two rollers clamp deliver, five rollers for leveling.
1) Using type Yl32-315 4 pillar hydraulic pressure puching machine,
2) Hydraulic pressure power: 11kw.
3) Material of blade mould & plunger chip is alloy steel Cr12
1) Forming racks: 13sets
2) Width of machine: 550mm
3) Material thickness:3mm
4) Shaft diameter:80mm
5)Roller material:45# steel polished and coated with chrome HRC55-60°
6)Shaft material:high grade No.45 steel after treatment
7)Power of main machine: 55kw
8)Driven type:1.5 inch double chain
Material for Cut-Off Modular:Cr12 steel
Hardness for Heat Treatment:HRC55 – 60°
Cut-Off Type:Hydraulic, Automatic Cut-Off
Cut-Off Modular:1 set
Motor for Hydraulic Stand: 11kw
Type: PLC Frequency Control System with touch screen
PLC Brand: Japan Panasonic
Encoder Brand: Omron
Length Error: ±2mm
It is simple and used to load finished product.
Contact Person: Mr. Luo