Payment & Shipping Terms:
|Pole Diameter:||60-450 MM||Pole Length:||14000 MM|
|Dolley Length:||1500 MM||Clamp Type:||Hydraulic Control Chain|
|Welding Type:||Submerged Arc Welding Or Gas-shielded (CO2) Welding||Welding Power:||DC-630 Direct Current 630A|
|Machine Size:||22000 X 2000 X 2000 MM||Machine Weight:||8500 Kg|
|Total Power:||8 Kw||Painting:||RAL3024 After Shot-blasting Rust|
automated welding machine,
automatic welding equipment
Dodecagon Light Pole Sub murged arc Welding Machine Use Lincoln Welding Power and Flux Transmission Recovery
Polygonal light pole shut and welding machine is mainly use for combining the steel joint and welding the longitudinal seam .Light pole was widely used in the world .Where you can find the high quality productions for making light pole .
As a specially in producing the pole clamping and welding machine. We have lots of experience in producing this machine.The pole was widely used in the city and road. It is suitable for one piece type polygonal and circle taper light pole. it is automatic welding line, the dolly with speed adjustable motor can pull ( or push) the light pole from small end to big end , The hydraulic cylinder through mechanical chain,Worm wheel push the clamping wheel to close the pole and do welding at the same time.
The machine includes the following items :
Suitable light pole Thickness base
Light pole diameter: 60~450mm
Light pole diameter: 70~450mm
Light pole diameter: 250~450mm
Power of Motor for Pump
Power of Motor for pulling dolly
4 KW, AC speed changeable type.
630A, (Submerged Arc Welding and
Welding wire diameter
1.2,1.6~2mm welding wire, according the pole
1.1~2m/min (Note: different thickness speed
Overall sizes (mm)
22000x2000x2000 mm (LXWXH)
Lincoln welding machine (USA BRAND)
Note:, If chose the Lincoln welding machine,normally it is suitable for Submerged Arc Welding
Fast motorized return back for dolly
Note:for the standard machine, the dolly return back can be motorized with working speed, it
is very slow for return back process. So, normally, the operator will open the dolly clutch and
push the dolly by manual.
In order to reduce the manpower, we have option: Fast motorized return back for dolly. The
operator only push button, the dolly will be back to the welding head.
See attached detail photos.
Both Side additional hydraulic cylinder
It is suitable for small diameter big thickness light pole, or steel plate with high tensile
strength light pole.
With this additional option , the diameter from 60~450mm, thickness 2.8~6mm, all pole can be
suitable. And easy for operation.
Electricity pole and lamp pole was widely used in the countryside and City ,such as electricity transport pipe , shine lamp pole ; blinker , Offshore,Petro Chemical ; Plate Heat Exchanger ; Charged air cooler ; Pressure Vessel ;Pipe system&Steel works etc.
1. All the bolt using 12.9 grade Bolt , not using 8.4 grade. Making the machine more stronger.
2. 20 % overweight design , could making the rotator focus more.
3. Double row wheels ,not only making the wheels stable, but also artifacts to increase friction.
4. All the parts using well-known brands in China or other countries . Quality is more reliable .
5. Using double row bearings.
6. The base of rotator welded by plates, with high strength, no deformation after long time using.
Why choose my factory?
360°guarantee makes ordering risk free.
20 years welding machine manufacture experiences.
one-stop service of welding.
Quickly feedback for your problems.
Contact Person: Mr. Luo