Payment & Shipping Terms:
|Milling Head:||2 Sets||Milling Head Brand:||Taiwang E-long|
|Trolley Support:||Triangle Seat||Cable Moving:||Trolley Line|
h beam welding machine,
h beam welding line
China Advanced 15M Steel Plate Edge Milling Machine For H Beam Box Beam Production Line With Double Milling Heads
This machine is an advanced milling machine which adopts new technology; it is widely used in industries of pressure vessel, boiler, ship building, electric power and chemical industry and mechanical and so on. Before welding, the plate should be in processing straight edge, bevel edge and U type groove. It has the following advantages:
a. The machine body is welding assembly. After welding, the work piece was backfired in high temperature and stress-released to avoid deformation.
b. The arrangement of guide rail is the combination of suspending type and base type, this combination has greatly improved the stability than common suspending type, and also can reduce the vibration during work.
c. Guide rail adopts high quality 45﹟ steel, it is after forging and planning and aligning, and then precise treatment, quenching and precise milling, then fixed by screw on the body, thus can improve guide rail’s precision and wearability.
d. Each feeding mechanism of milling head is driving by one frequency motor.
e. the facer of milling head is adopt common facer
f. There’s work piece guarding device to make the positioning fast and convenient, then greatly improved efficiency.
g.There’s a throat hole at end beam, when milling super-long work piece, can extend to another face then continue work.
h. The panel adopts safe slip-touch cables, which is safe and beautiful.
i. This machine uses separate structure, this is easy for transportation.
The milling machine can processing different forms of plate , such as sheet metal before welding, machining straight-edge, bevel, X, Y,U groove, etc., for welding with improved product quality and work efficiency, reduce energy consumption, reduce labor intensity, etc., it’s the latest groove advanced processing equipment.
If you do not see anything that matches your requirements please contact us to discuss your needs further.
The angle of milling
The thickness of being processed steel plate (mm)
The max depth of milling bevel edge at one time (mm)
Hydraulic pressure (Mpa)
The number of the cylinders
The height between the worktable and the ground (mm)
The power of driving motor (kw)
The power of milling motor (kw)
The power of oil pump motor (kw)
1. The rail of lathe bed use high quality carbon steel, welded together with the machine after milling, and then by machining, which with good Wear-resisting performance, and it’s hard deformation.
2. lathe bed, wall panels, and pressure beam welded by high quality plate, using box-type structure. All welds according to specifications welding, after welding parts need to be annealed to eliminate the welding stress. Lathe bed rail is 45 # steel forgings, processed high-frequency hardening, hardness HRC45 ~ 50, removable, and the bed fixed with bolts and dowel pin for easy maintenance.
3. .The normal elastic deformation of the beam on elastic 8-20mm, cylinder release after the reset is a normal situation.
4. .The trolley of the travel box drove by one feeding motor and fast return motor. The travel box install with reduce unit, one extend gear matched on the rail, start the motor it can move the trolley as milling speed. Feeding speed is variable, fast speed can upto 1m/min,travel smooth, with high milling efficiency. The travel also install with fast return motor, fast return speed is 5m/min,A clutch to control work.
5. .Cross slider installed on the trolley box , power-operated lifting, warm and wheel reducer, screw driven slide down. Manually adjustable front and rear direction, from top to bottom and front and rear direction of the Vice-regulation are used to guide rail. Cross slider adjusting smooth and reliable, easy operation
6. .Angle adjusting mechanism mounted on the lifting of regulatory agencies on a skateboard, skateboarding down with the lift. The unit mainly by a fan-shaped worm gear and a worm component, manual adjustment. Head connected to the fan worm gear by an transition plate, , the angle adjusting mechanism allows Head 0-45 ° angle with the horizontal adjustment. Meet the needs of groove.
7. Hydraulic control system install inside of the lethe bed, the bottom half of the hydraulic control is the oil box, top half install with hydraulic components, pump station and motor, etc. Hydraulic oil through hight pressure hose to each oil way and cylinder.
Contact Person: Mr. Luo