Product Details:
Payment & Shipping Terms:
|
Working Speed:: | 12 Meters / Min | Forming Station: | 20 |
---|---|---|---|
High Light: | c purlin roll forming machine,purlin roll former |
15KW Z & C Purlin Roll Forming Machine With Hydraulic / Manual Decoiler and Siemens PLC Automatic Control Whole Line
Machine overview
C and Z steel purlins are necessary for the modern steel industrial buildings, and some residential building as well, and various kinds of c/z purlin roll forming machines have been developed to produce C/Z/U steel purlins.
In accordance with different requests for C and Z steel purlins, in the markets there are c purlin roll forming machines for the production of C steel sectional channels, z purin roll forming machines for the manufacturing of Z shaped channels and interchangeable c/z purlin roll forming machines which are designed to produce both C and Z steel purlins without replacing any rolling tools or cutting dies.
Simple introduction of this machine
Details of Z purlin roll forming machine
Item |
Description |
Material of roller : |
GCr15,quenched |
Material of shaft : |
45#forge steel |
Material of punching mold : |
Cr12 HRC 58-62 |
Material of cutting blade : |
CR12with heat treatment |
Main power : |
15KW |
Hydraulic power : |
7.5KW |
Working speed : |
15m/min(not include cutting and punching) |
Forming stations : |
18 stations |
Control system : |
PLC Panasonic |
Transmission : |
By gearbox |
Automaticity : |
Semi-Automatic/Automatic |
Main dimension(L,W,H) : |
11000mm*1400mm*1400mm |
Total weight : |
14000KG |
Main parts of Z purlin roll forming machine
NO. |
Name |
Unit |
Qty |
1 |
Roll Forming Main Machine |
Set |
1 |
2 |
Hydraulic/Manual decoiler |
Set |
1 |
3 |
PLC Control System |
Set |
1 |
4 |
Hydraulic Punching Device |
Set |
1 |
5 |
Hydraulic Cutting Device |
Set |
1 |
6 |
Hydraulic Station |
Set |
1 |
7 |
Manual Out Table |
Set |
2 |
Details of main parts
Name |
Describe |
Control panel (PLC Panasonic) |
The machine will automatically cut to length and stop when requiredquantity is achieved. |
Control panel:button-type switch and touch screen |
|
The program should be can set 5 different measure and quantity. |
|
Tolerance of length: 3m+/- 1.5mm |
|
Voltage,Frequency,phase:415V,50HZ,3Phase |
|
Punching and cutting device |
Punching with hydraulic drive |
Punching in longitude wise controlled by PLC |
|
Punching at horizontal wise adjusted by manual hand wheel |
|
Hydraulic Cutting before forming: Cut the sheet before roll forming to required length. |
|
Cutting motion: The main machine automatically doesn't stop and the continue punching and cutting. |
|
Hydraulic decoiler
|
Hydraulic coiler car adopt motor advance (power:3KW, hydraulic up and down:12MPA) |
Single head to put the coil hydraulic flow over device. |
|
Coil spec:Φ508×1300mm |
|
Flow over range:Φ460-520mm |
|
Oil cylinder:Φ160×90mm |
|
Transmission:drive by hydraulic brake |
|
Load bearing:5T,10T,20T |
Contact Person: Mr. Luo
Tel: +8613961736266